Enterprise Information
Wall-hung boiler manufacturer: What is the working principle?
Release time:
2022/05/26 14:23
Wall-hung boiler manufacturer: What is the working principle? A wall-hung boiler is a general term for a natural gas boiler, the full name is a gas wall-mounted heating boiler, which is an electric water heater powered by natural gas. It has safety protection measures such as cold protection, anti-air heat protection, accidental shutdown protection, overheat protection, centrifugal pump, and maintenance. Natural gas boilers have a central heating function, and wall-hung boilers developed by wall-hung boiler manufacturers can meet the heating needs of multiple residences. Each house can set a comfortable temperature as needed, and decide which room can independently turn off the heating as needed, but can also provide large flow rate adjustment, constant temperature environment sanitary soup. Wall-hung boiler manufacturer: What is the working principle? After the wall-hung boiler starts the motor to enter work, the centrifugal fan starts first, the engine combustion chamber negative pressure drops, the wind pressure switch sends a command to the centrifugal pump, after the centrifugal pump starts, the water flow switch starts the home appliance, and then sends the command to the natural gas ratio solenoid valve, and the natural gas ratio solenoid valve gradually starts. The natural gas ratio solenoid valve and wind pressure switch are closed, the engine combustion chamber negative pressure drops, the wind pressure switch is closed, the wind pressure switch sends a command to the centrifugal pump, the centrifugal pump starts, the centrifugal pump starts, the water flow switch is closed, the water flow switch starts, and then, the water flow switch starts the home appliance solenoid valve, and then the command is sent. During the entire process of daily use, a low-temperature file can be set for operation. If you go out for a long time, you can drain the water inside the wall-hung boiler and turn off the system software. When customers use the gas wall-hung boiler every day, they should promptly check the sealing characteristics of the gas pipeline and corrugated metal pipe, such as the wall-hung burner, main heat exchanger, etc. If necessary, the metal oxides on the shell, nozzle, or igniter should be cleaned, or the dust on the main heat exchanger should be removed to avoid damage to the working state and heat transfer effect. In addition, if the wall-hung boiler is approaching its service life or service life protection, maintenance customers use the wall-hung boiler. If the recent gas consumption is found to have increased or the noise has increased, they should consult whether the wall-hung boiler needs to be cleaned or protected. Wall-hung Brand believes that the wall-hung Brand needs to be cleaned or protected again at most three years after use. Wall-hung boiler manufacturer: If the water pressure of the heating system is frequently reduced, it should be carefully checked. If there is no water leakage in the wall-hung boiler itself, and the equipment is operating normally, there may be a risk of leakage in the heating system, which may cause the service life of the wall-hung heating boiler and pipelines to be too high in winter. If there is no one at home for a short time, the wall-hung boiler antifreeze setting must be turned on to prevent the heater, wall-hung boiler and other equipment from freezing. The wall-hung boiler flue pipe sucks in exhaust smoothly and directly leads to the outside to prevent safety risks.
see more...
Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership and does not bear the relevant legal responsibility. If you find that this website is suspected of plagiarism, please go to contact us to report, and provide relevant evidence, once verified, this site will immediately delete the suspected infringing content.
recommend products
Recommend